Established Since 2001.
Leading Innovators in Industrial Magents.

"An ISO9001:2008" Company


MagnaSlot 75 » Electro Permanent Magnetic Chuck - 75 mm Pole
EPM 1000x2000 chuck. Entered into LIMCA BOOK OF RECORDS, INDIA as the LARGEST ELECTRO PERMANENT MAGNETIC CHUCK MADE. published in 2009 edition under Business Chapter.
EPM 1000x2000 chuck. Entered into <b>LIMCA BOOK OF RECORDS, INDIA as the LARGEST ELECTRO PERMANENT MAGNETIC CHUCK</b> MADE. published in 2009 edition under Business Chapter.
EPM chuck on a Milling machine
EPM chuck on a Milling machine
EPSQUARE75 - 500x500 Chuck with an arrangement of Fixed and Spring Blocks
EPSQUARE75 - 500x500 Chuck with an arrangement of Fixed and Spring Blocks
EPSQUARE75 - 600x2000
EPSQUARE75 - 600x2000
Electro Permanent Magnetic Chuck being used on a conventional milling machine for gang milling
Electro Permanent Magnetic Chuck being used on a conventional milling machine for gang milling
Electro Permanent Magnetic Chuck used for cutting 45 Deg on a steel Block
Electro Permanent Magnetic Chuck used for cutting 45 Deg on a steel Block
Facing Operation undergoing on a job clamped using Magnets.
Note: the chips does not come in way of the moving cutter
Facing Operation undergoing on a job clamped using Magnets.<BR><u>Note</u>: the chips does not come in way of the moving cutter
Block machining on a VMC while the job is clamped magnetically using Electro Permanent Magnetic chuck
Block machining on a VMC while the job is clamped magnetically using Electro Permanent Magnetic chuck
Electro Permanent Magnetic Chuck used for grinding operation
Electro Permanent Magnetic Chuck used for grinding operation
Electro Permanent Magnetic Chuck used to Machining of a rough block in a Horizontal Machine
Electro Permanent Magnetic Chuck used to Machining of a rough block in a Horizontal Machine
THrough Drilling operation on a VMC.
Note: the job is raised above the chuck using pole extensions, so that the through drill does not damage the Electro Permanent Magnetic chuck.
THrough Drilling operation on a VMC.<BR><u>Note</u>: the job is raised above the chuck using pole extensions, so that the through drill does not damage the Electro Permanent Magnetic chuck.
a conventional vice clamped on a Electro Permanent Magnetic Chuck
a conventional vice clamped on a Electro Permanent Magnetic Chuck
EPSQUARE75 - 600X1500
EPSQUARE75 - 600X1500
a 6000x2500 mm plate, used for drilling on a VMC. the solution has 4 numbers of EPSQUARE75-300x400
a 6000x2500 mm plate, used for drilling on a VMC. the solution has 4 numbers of EPSQUARE75-300x400
Electro Permanent Magnetic with Special V Profile made to clamp the round job.
Electro Permanent Magnetic with Special V Profile made to clamp the round job.
Electro Permanent Magnetic Chuck with special V Profile
Electro Permanent Magnetic Chuck with special V Profile
Electro Permanent Magnetic Chuck with Special V Profile made to clamp the round job.
Electro Permanent Magnetic Chuck with Special V Profile made to clamp the round job.
EPM Chuck used to clamp a die on a Horizontal Machining Centre
EPM Chuck used to clamp a die on a Horizontal Machining Centre